30GPH Injection Pump

Features Include:Pressure adjustable from 100-300 PSI3/8 NPT female inlet & outlet portMotor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valveBuilt-in thermal protectionBuilt-in anti reverse check valve Built-in heat sink on back of motorHeavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSICan run dry up to 1 hour without damage100% methanol compatibleTested prior to shipping Made in the USAWeight 5.2 lbsFlow & Horsepower Ratings @ 13.5 Volts:1.4 gallons per minute open flow115 liters per hour @ 190 PSI30 gallons per hour @ 190 PSI1890 cubic centimeters @ 190 PSISupports up to 1700-2200 horsepower - 100% water mix Supports up to 1000-1300 horsepower - 50/50 water methanol mixSupports up to 800-1100 horsepower - 100% methanol mixSpecial Notes:Do not use with petroleum products (E85, E98, gasoline, diesel, etc) Use 12 gauge wire for power and groundDoes not include pump fittings. Pump fittings are available for sale separatelyPumps come preset at 220 PSIExpect 4-5 years of service if pump pressure is left at 220 PSI or belowRunning the pump over 250 PSI is not advised and will shorten pumps lifeAll tests were performed using a 6AN stainless steel braided hose on the inlet side of pumpUsing 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow outputPump may be mounted vertical or horizontal.